Industrial Hardware Supplier Malaysia
A High Performance Air Valve that meets all application and installation parameters regardless of piping material. The Aerokinetic Air Valve is ideal for the release of high volumes of air in piping systems and has minimum moving parts thus ensuring long- term reliability.
More Details...
Galvanized Steel Wire is highly resistant to moisture and mechanical damage. Hot-dipped galvanizing process ensures the wire is fully protected and covered by a layer of zinc coating.
Galvanized Steel Wire 50KG
Wire Gauge:
Size (mm):
SWG 12
2.64mm
SWG 15
1.
More Details...
Polytetrafluoroethylene(PTFE) Tape can also be called Plumber's Tape. It is thin-film tape used by heating engineers and plumbers for sealing pipe threads. The tape can be wrapped around pipe threads and joints to form a tight seal, which helps to stop any leaks.
Size
0.
More Details...
Pressure gauges are analogue or digital instruments used to measure the pressure or vacuum within a fluid power system. Gauges are installed at any point within a machine where the pressure needs to be measured.
More Details...
Detachable Joint(DJ) for AC pipe are use to connect two sections of AC pipe without the use of threads. It provide quick, leak, free and reliable method to joining two section of pipe. It’s normally for drinking water, seawater, sewage & irrigation application.
More Details...
Detachable Joint(DJ) For uPVC are use to connect two sections of uPVC pipe without the use of threads. It provide quick, leak, free and reliable method to joining two section of pipe. It’s normally for drinking water, seawater, sewage & irrigation application.
More Details...
Variable Adaptor(VA) for AC / UPVC are use to connect two sections of uPVC pipe to AC pipe without the use of threads. It provide quick, leak, free and reliable method to joining two section of pipe. It’s normally for drinking water, seawater, sewage & irrigation application.
More Details...
Size 80mm, 100mm, 150mm, 200mm, 250mm, 300mm Model LYE 789 Material Ductile Iron
Size 50mm, 80mm, 100mm, 150mm, 200mm, 250mm, 300mm Model LYE 785 Material Ductile Iron Working Pressure PN16
Size 50mm, 80mm, 100mm, 150mm, 200mm, 250mm, 300mm Model LYE 786 Material Ductile Iron Working Pressure PN16
Size 80mm, 100mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 600mm Model LYE 784 Standard BS EN 545 Material Ductile Iron Working Pressure PN16
Universal flange adaptor are designed for pipelines with a usage tolerance range to fit most standard pipe materials thereby dramatically reduces the number of dedicated flange adaptor which need to be stock for maintenance purpose.
More Details...
Universal straight coupling used in plumbing to connect two pipes together. They consist of a socket at both ends where the pipes are pushed together and joined. They allow straights run and for central heating and water system to be extended in a straight line.
More Details...
Size 50mm, 65mm, 80mm, 100mm, 125mm, 150mm, 200mm, 250mm, 300mm, 350mm Material Ductile Iron Flange Drill to PN16
D.I. Saddle For Mild Steel is use to tapping from Mild Steel / D.I. pipes to communication pipeline. It can be placed anywhere on the pipe barrel, no cuts have to be made, saving time and money.
More Details...
D.I. Saddles For uPVC Pipe is used for joining an outlet into an existing uPVC pipeline. The fittings “tap into” the pipe, without requiring a cut and join in the main pipe. It is used to connect the main pipelines to branch pipelines for cold water.
More Details...
A manhole cover is a removable lid that covers the manhole and prevents people and things from falling into it. A manhole cover can be different shapes like rectangular, square and circle.
More Details...
Manhole Step is a series of steps individually attached or set into the walls of a manhole structure. They are not considered to be an individual rung ladder. It is designed for direct installation, using of plugs or additional installation into concrete parts.
More Details...
Manhole Step is a series of steps individually attached or set into the walls of a manhole structure. They are not considered to be an individual rung ladder. It is designed for direct installation, using of plugs or additional installation into concrete parts.
More Details...
Size 609mm x 320mm x 440mm Standard BS EN124:2015 Material Ductile Iron Application Manhole, Industries, Road infrastructure
Concrete chamber sections mostly refer to square or rectangular chamber sections. Concrete chamber sections are manufactured from precast concrete which has been factory controlled to ensure high quality.
More Details...
A Swing double flanged check valve is designed to prevent the medium in the pipeline from flowing back. As pressure reaches zero, the valve shuts fully to prevent back flow.
More Details...
Fire Hydrant Landing Valve is a valve interface that is placed on fire protection pipe nets in buildings and supply water to fireplace. It is a fixed fire hydrant used for putting out fire in buildings such as factory, warehouse, high buildings even as well as ships.
More Details...
Fondu Cement is the world’s first commercially manufactured calcium aluminates cement. Fondu Cement does not release lime during hydration. This property gives it good chemical resistance to acid corrosion and to a large number of aggressive substances.
More Details...
U-bolt is a letter U-shaped fastener, with two threaded arms (or legs) stretching from a curved base. G.I. U- bolt have screw threads on both ends to ensure the pipe stability. U-bolts have primarily been used to support pipework, pipes through which fluids and gasses pass.
More Details...
Hexagon nuts are six-sided hexagon nuts which normally used to tightening the bolts and screws. Hexagon nuts can be used in all types of bolts and it is not only limited to hexagon headed bolts.
More Details...
Slotted angle is a system of reusable metal strips used to construct shelving, frames, work benches, equipment stands and other structures. It enables assembly of structures fixed with nuts and bolts. Slotted angle shelving is an efficient storage system used widely in every industry for warehousing and other storage needs.
More Details...
Slotted angle is a system of reusable metal strips used to construct shelving, frames, work benches, equipment stands and other structures. It enables assembly of structures fixed with nuts and bolts.
More Details...
Threaded rod, as its name suggests, is a metal rod that is threaded throughout the entire length of the rod. It’s typically made from carbon, zinc coated or stainless steel. The threading allows for bolts and other types of fixings to be fastened onto the rod to suit many different construction applications.
More Details...
Threaded rod, as its name suggests, is a metal rod that is threaded throughout the entire length of the rod. It’s typically made from carbon, zinc coated or stainless steel. The threading allows for bolts and other types of fixings to be fastened onto the rod to suit many different construction applications.
More Details...
Size 15mm - 200mm Material Cast Iron / Ductile Iron Specification JKR-20200-0042-99 Application Used for Saddle application
A rubber expansion joint is a flexible connector fabricated of natural or synthetic elastomer and fabric internal metallic reinforcements designed to provide stress relief in piping systems due to thermal movements and mechanical vibration.
More Details...
Rubber Gaskets act as a static seal between the two irregular flange faces and are made to operate under various operating conditions with varied pressure and temperature ratings.
More Details...
Rubber O Ring is a mechanical gasket in the shape of a torus or donut and is used for static and dynamic applications where there is relative motion between parts and the possibility of friction. Rubber O Ring is low cost, reliability, pressure resistance, and ease of mounting.
More Details...
Stainless steel nipples are used for threaded connection between industrial fittings and pipe fittings and it’s available in various grades, diameters and threads stainless nipple is a short threaded fitting with male threads at both ends for connecting other fittings.
More Details...
Swivel Loop pipe Hanger is used to supports and related accessories to assist you with your plumbing, HVAC and fire protection pipe installations. It can absorb shock, anchors, guides and carries the load of your copper fire protection pipe lines.
More Details...
Horobin Test Plugs are use for drain and sewer testing. Horobin specialism in testing equipment for drainage systems, and their product are utilized across the world. Horobin testing plugs are used to carry out pressure testing on all types of pipes, and this testing is mandatory in many situations.
More Details...
Scaffolding is a movable platform for workers (such as bricklayers, painters, or miners) to stand or sit on when working at a height above the floor or ground. Scaffolds are widely used on site to get access to heights and areas that would be otherwise hard to get to.
More Details...
HDPE Water Tank are specially designed with a seamless one-piece construction making them lightweight and particularly strong. Made from superior food grade Polyethylene resins, the HDPE storage tanks are non-toxic and odorless.
More Details...
BRC Wire Mesh is a steel reinforcement material in concrete.It is widely used for reinforced concrete to increase its tensile strength. BRC Wire Mesh consisting of a series of high-strength wires welded together to form a square or rectangular grids fabric.
More Details...