In pursuit of the passion to become a world class integrated manufacturing and distribution hub for Pipes, Valves and Fittings, Engtex has started to venture into manufacturing of steel pipes, valves & fittings and other steel related products since 1995. Some of the key manufacturing operations are as below:-

Engtex Ductile Iron Pipe Industry Sdn Bhd (‘EDIP’)
specializes in the manufacturing of ductile iron pipes, joints, fittings and industrial casting products since 2004. The Company operates a state-of-art production facility at Gebeng Industrial Estate, Kuantan, Pahang. As a quality and environmental focused company, EDIP is the first Malaysia ductile iron pipes producer that is accredited with 5S Quality Environment Management, ISO 14001:2004 / BSEN 14001:2004 Environmental Management System, OHSAS 18001:2007 Occupational Health & Safety Management Systems, and ISO 9001:2008 Quality Management System.

EDIP’s ductile iron pipes are marketed under the brand name of “SUASA UNIK”, “EDIP” and “ENGTEX”, and are produced in compliance with the international standards BS EN 545, BS EN 598, ISO 2531, and acquired product certifications/approval endorsed by SPAN, IKRAM (K9, Class 40), PSB Singapore, CPRU Brunei and Sultanate of Oman Ministry of Commerce and Industry. The pipes produced ranging from 100mm to 800mm in diameter.

Well-known as the premium quality manufacturer, EDIP products are widely accepted by authorities, professionals and industry experts in both domestic and overseas markets. In line with the market globalization move, EDIP has rapidly its growing overseas markets include Singapore, Indonesia, Brunei, Vietnam, Hong Kong, Taiwan, Sri Lanka, Middle East, and etc.

EDIPI’s ductile iron pipes are an ideal piping material primarily used for water and sewerage systems due to its ductility, easy installation, high resistance to corrosive environment, low maintenance.

Characteristics of Ductile Iron Pipe:-
DUCTILITY : The ability to deform when stressed beyond yield point.
STRENGTH : Superior tensile strength to withstand severe loads and high internal pressures.
TOUGHNESS : High resistance to shock or impact due to improper handling, water hammering or unstable condition.

Advantages of Ductile Iron Pipes:-

  • Strong and long lasting
  • Easy installation
  • High resistance to corrosive environment
  • Low maintenance cost
  • Damage rate caused by earthquake is lower comparing to other material

LYE Manufacturing Sdn Bhd (‘LYE’) started as a producer of cast iron products since 1977 under the name Lianyeu Manufacturing Sdn. Bhd. Today, LYE has successfully transformed into a leading manufacturer and exporter of ductile iron valves, joints, fittings, pillar hydrants, manhole covers, and OEM casting products are particularly used in water supply, sewerage treatment and fire fighting industries.

As an ISO 9001:2000 Quality Management System accredited company, LYE products are manufactured under stringent quality controls in compliance with Malaysia JKR specification, British Standard & ISO Standard. Furthermore, LYE products are also certified by SIRIM, IKRAM, & SPAN in Malaysia and PSB in Singapore.

Given that LYE brand is a long established and well-known premium quality brand name, the products are widely accepted by authorities, professionals and industry experts in both domestic and overseas markets.

As a prominent market leader in Malaysia, LYE is continuously investing resources into product development, quality improvement, and after sales services to deliver high quality products and services to meet customers’ rising expectation and ensure high customer satisfaction.

Allpipes Technology Sdn Bhd (‘Allpipes’)
is principally involved in the manufacturing of spirally-welded mild steel cement lined pipes for water, sewerage, irrigations, dredging and structural steel pipes for jetties, bridge and high-rise buildings. Situated at Serendah, Selangor, ATSB’s manufacturing plant with a total land area of 20 acres has commenced operations since 1995. Currently, it’s equipped with four spiral machines capable of producing mild steel pipes ranging from 100mm to 3000mm.

Allpipes’s products are certified by IQCI (Ikram Quality & Certificates Institute) and SPAN (Suruhanjaya Perkhidmatan Air Negara); a government recognized body for product certifications. In additions, the products have all the state water authorities approval.

As a dedicated ISO 9001:2008 certified company that emphasize on quality assurance, Allpipes has deeply committed to deliver products that undergo the stringent total quality management processes encompass material sourcing, manufacturing process, quality tests & inspection and customer service in fulfilling their underlying Quality Policy:-

  • Achieve Total Customer Satisfactions is our Ultimate Goal
  • Nurture the spirit of commitment towards quality management system for continual improvement
  • Do our jobs right the first time, every time to produce product of consistent quality

Engtex Metals Sdn Bhd (‘EM’) commence its operations since 1995 and has successfully grow impressively to become one of the top three largest wire mesh manufacturer in Malaysia. Today, EM have two factories equipped by state-of- art mesh welding machines and well trained work force located at Ijok, Selangor and Johor Technology Park, Johor.

Driven by the passion to be the world class steel reinforcement products manufacturer, EM is committed to uphold superior product quality standard and continuously invest to upgrade the production facilities to enhance its flexibility and cost efficiency to deliver best value products to meet the rising customer expectation. In addition to its ISO9001:2008 Quality Management System certification, EM also granted the product certification license awarded by Sirim QAS International Sdn Bhd for welded steel fabric for the reinforcement of concrete MS 145:2006, and for cold reduced steel wires MS 144:2001.

EM a leading and reputable steel reinforcement products manufacturer in delivering superior quality welded fabric mesh (cut-to-size, engineered, and standard mesh), hard drawn wire, steel bar (cut & bend, and construction bar), fence, nail and etc.

To replicate the successful strategy of EM, such similar manufacturing operations are established by other Engtex member companies namely East Coast Manufacturing Sdn Bhd at Kuantan and Apsonic Sdn Bhd at Bukit Minyak Industrial Park, Bukit Mertajam, Penang respectively.

Hachita Enterprise Sdn Bhd (‘Hachita’)
has been operating a steel service centre since 2001. Their core products are comprising of mild steel hot rolled coils/plates, hot rolled pickled & oiled coils/sheets, galvanized iron coils/sheets, cold rolled steel coils/sheets and etc. It also specialize in distributing long steel products such as mild steel I-beam, angle, channel, boiler plates, flat and square bar, and etc. Hachita’s major customers embrace of steel stockists, steel fabricators, press metal tank producers, shipping, metal stamping, automotive industries and etc.


Hachita's steel service centre is strategically located at Kepong Industry Park, Kuala Lumpur. The presence of state- of- art machines & equipments and experienced work force enabling Hachita to provide a wide range of steel processing services inclusive of cut- to- length, shearing, and slitting of metal coils, as below:-

Type of Machine

No. of Unit    

Thickness Width Length
Hot- rolled coil leveler                    1 1.20mm- 12.0mm       900mm- 1570mm            700mm- 6800mm   
Cold- rolled/ Galvanized Coil leveler 1 0.20mm- 2.50mm 900mm- 1300mm 600mm- 3100mm
Hot- rolled slitting line 1 3.00mm- 8.00mm 900mm- 1600mm (Min slitting width 300mm) -


Quick Link